Why Does Insulated Glass Shatter By Itself?

Aug 06, 2025

Leave a message

1.Quality issues of the original glass sheet

roof insulated glass01

Some glass manufacturers, in order to cut costs, use low-quality glass or uncontrolled glass recycling and processing. The quality of the glass products they produce, such as double-pane insulaed glass and triple-pane insulated glass, does not meet the standards and is more prone to self-explosion under conditions such as temperature changes. If the original sheet of tempered glass contains nickel sulfide stones, these stones will freeze the high-temperature crystalline state during the production process of tempered glass and remain at room temperature. However, this high-temperature crystalline state is not stable at room temperature and will transform over time, accompanied by a certain volume expansion during the transformation process. If the stone happens to exist in the tensile stress zone of the tempered glass, this phase transformation process will cause the tempered glass to suddenly shatter, that is, the self-explosion phenomenon. Moreover, glass itself has a self-explosion probability of three per thousand. During the production process of glass, various impurities are contained, and these impurities may also cause self-explosion under the influence of external forces and other factors. The self-explosion rate of white float transparent glass is lower than that of colored transparent glass. The self-explosion rate of all colored transparent glass is lower than that of coated glass. The self-explosion rate of coated glass in hidden-frame curtain walls is lower than that of coated glass in framed glass curtain walls. The self-explosion rate of single pieces of glass after being installed on the wall is lower than that of insulaed glass after being installed on the wall.

office insulated glass03

2.Internal stress factors

 

When producing insulated glass by the horizontal method (currently, almost all small products made by hand or semi-hand are produced by the horizontal method), due to the fact that the volume supported at the bottom of the glass is relatively small and the support is mostly at the center, and the weight of the upper piece of glass is all placed on the lower piece of glass, the lower piece of glass bends upward, while the upper piece of glass bends downward due to its own weight. As a result, the spacer layer of the insulated glass becomes thinner. When the glass is installed and used, negative pressure naturally exists, causing prestress on the glass. This phenomenon is more prominent in larger area insulated glass (correction is necessary when the deformation is severe). Due to the existence of prestress on the glass, its ability to resist external forces is reduced, and it is prone to cracking when the external force factors change greatly. In addition, during the production of insulated glass, the pressure sealed in the spacer layer is the pressure at the production environment temperature. The thermal expansion and contraction of air will cause changes in its pressure. In summer, the usage environment temperature is generally higher than the production environment temperature. The air in the spacer layer expands, generating positive pressure. Especially for insulating glass made of heat-absorbing glass, the heat absorption effect of the glass is very strong The higher the air temperature within the spacer layer, the greater the positive pressure generated. When the pressure caused by the expansion of air in the spacer layer is higher than the breaking pressure of the glass, the glass will shatter. Also in winter, when the temperature is higher than the ambient temperature during use, the air inside the spacer layer shrinks, creating negative pressure. When the glass area is large and the spacer frame is small, the center parts of the two pieces of glass may stick together, forming rainbow-like spots, which seriously affects the usage effect. Under the combined action of wind and snow loads, the glass may break.

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!