Will The Interlayer Film Of Laminated Glass Affect The Light Transmittance?

Aug 06, 2025

Leave a message

Laminated glass is a composite glass product made by sandwiching one or more layers of organic polymer interlayer between two or more pieces of glass, and then subjecting them to a special high-temperature pre-pressing (or vacuuming) and high-temperature high-pressure process to permanently bond the glass and the interlayer together.

door laminated glass 01

Commonly used interlayer films for laminated glass include :PVB, SGP, EVA, PU, etc.

In addition, there are some rather special types such as colored interfilm laminated glass, SGX type printed interfilm laminated glass, and XIR type LOW-E interfilm laminated glass, etc. Decorative and functional laminated glass such as laminated glass with embedded decorative parts (metal mesh, metal plate, etc.) and laminated glass with embedded PET material.

facade laminated glass 01

The light transmittance of the interlayer film in laminated glass has a direct impact on the overall light transmittance of the glass. For instance, the light transmittance of the interlayer film specifically designed for explosion-proof glass is over 90%, while the one-way vision glass film has a certain impact on the lighting inside the vehicle, but the effect is not significant. In addition, there is a semi-transparent PVB interlayer for laminated glass. By compounding a reflective layer between the upper and lower layers of the PVB, the light transmittance passing through the PVB interlayer is reduced, thereby meeting the actual requirements

The transparency of laminated glass is related to the PVB film of the original glass sheet. Generally, the transparency of transparent float glass is 80%-85%. After adding 0.76PVB to two pieces of glass, the transparency is 75% -78%.

The transparency of laminated glass is slightly lower than that of single-pane glass, but the difference is not significant. There are two methods for making laminated glass. One is to pour glue between two pieces of glass (wet method), and the other is to place a film between two pieces of glass and then heat it to melt the film (dry method). Dry-process laminated glass is better than wet-process laminated glass because the glue in the middle of wet-process laminated glass may turn yellow over time, while dry-process laminated glass will not.

Laminated glass are usually made of polyester materials or other polymer materials. The transparency, color and reflectivity of these materials will directly affect the appearance of laminated glass. For instance, high-transparency film can maintain the clarity of glass, ensuring that the line of sight is unobstructed when passing through. Colored films, on the other hand, add specific tones to the glass and alter its original visual effect.

The thickness of the film is also a key factor. Thicker film may increase the overall thickness of the glass, thereby affecting the refraction and reflection of light, making the glass appear heavier. In addition, thick films may produce more obvious visual differences at the edges, and meticulous installation techniques are required to reduce the appearance impact caused by such differences.

Ordinary PVB glue is indeed likely to slightly turn yellow, bubble or delaminate under long-term high humidity and strong ultraviolet conditions, especially when the edge treatment is not in place, problems are more likely to occur. High-quality PVB or SGP films have stronger weather resistance and anti-yellowing ability, and can be stably used for more than 10 years without obvious discoloration in extreme environments such as oceanariums.

The quality of the original glass sheet also affects the transparency of laminated glass. If the transparency of the original sheet glass itself is not high, then the transparency of the laminated glass will also be affected.

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!