1.Heat insulation performance
The heat transfer coefficient K value of insulating glass filled with argon gas will be significantly reduced. This is because argon is a type of inert gas with the characteristics of low thermal conductivity and low specific heat capacity. When argon gas is filled into the interior of insulating glass, it can slow down the heat convection and heat conduction within the insulating glass, thereby reducing the overall heat conduction capacity of the insulating glass 134789. This means that argon-filled insulating glass can better prevent heat transfer, thereby enhancing its heat insulation performance.
2. Shading performance
The reduction of the heat transfer coefficient K value of insulating glass filled with argon gas can effectively block the ultraviolet rays from the outside sun, thereby improving the shading performance 4789. This is because, as the argon content increases, the heat transfer coefficient of insulating glass significantly decreases, thereby reducing the transmission of solar radiation.
3. Anti-fogging and anti-self-explosion performance
Insulating glass filled with argon gas, due to its excellent heat insulation performance, can reduce the probability of glass self-explosion. In addition, due to the presence of argon gas, insulating glass is less likely to experience fogging. Even after several years of use, it remains very clear.
4. Sound insulation performance
The sound insulation performance of insulating glass filled with argon gas will also be improved. This is because the density and dynamic viscosity of argon are higher than those of air, which helps to reduce the transmission of sound 468.
5. Anti-impact performance
The impact resistance of insulating glass filled with argon gas will also be increased by about three to five times. This is because the presence of argon can increase the strength and impact resistance of insulating glass.
6. Cost and Economic benefits
Filling inert gases (such as argon) is an additional item for glass and usually requires an extra charge. Nevertheless, considering the multiple effects such as heat insulation, shading and sound insulation brought by argon gas filling, this investment is cost-effective in the long run.
In conclusion, argon-filled insulating glass demonstrates superior performance in terms of heat insulation, shading, anti-fogging, anti-self-explosion, sound insulation and impact resistance. However, whether to choose argon gas filling depends on personal needs and budget.
