97% of the solar radiation energy is concentrated within the wavelength range of 0.3-2.5 micrometers, and this part of the energy comes from outdoors. The radiant energy of objects below 100℃ is concentrated in the long band above 2.5 μ m, and this part of the energy mainly comes from indoors.
If we take the room window as the boundary, in winter or in high-latitude areas, we hope that the radiation energy from outside can come in while the radiation energy from inside does not leak out. If the wavelength of radiation is taken as the boundary, the dividing point of indoor and outdoor radiant energy lies at the wavelength of 2.5 micrometers. Therefore, choosing room Windows with certain functions becomes crucial.
Ordinary transparent glass with a thickness of 3mm has a transmittance of 87% for solar radiation energy. During the day, most of the radiation energy from outside can pass through. However, at night or on rainy days, 89% of the thermal radiation energy from indoor objects is absorbed by them, causing the temperature of the glass to rise. Then, the heat is dissipated through radiation and convective exchange into and out of the room. Therefore, it is unable to effectively prevent the heat inside from escaping to the outside.
The thermal insulation performance of window glass is generally expressed by the "u" value, and the "u" value has a direct relationship with the emissivity of the glass.
The definition of the "u" value is: under ASHRAE standard conditions, the heat transfer from air to air formed due to the heat conduction of glass and the temperature difference between indoors and outdoors. The imperial unit is: British heat unit per hour per square foot per Fahrenheit temperature, and the metric unit is: watts per square meter per Celsius temperature. The lower the "u" value, the lower the heat transfer through the glass, and the better the thermal insulation performance of the window glass. Emissivity is the ratio of the heat radiated per unit area of an object to the heat radiated per unit area of a black body under the same temperature and conditions. Emissivity is defined as the ability of an object to absorb or reflect heat. Theoretically, a complete blackbody has 100% absorption for all wavelengths. That is, the reflectivity is zero. Therefore, the blackbody emissivity is 1.0.
Generally, the emissivity of float white glass is 0.84. The emissivity of most online thermally polymerized "Low-E" coated glasses ranges from 0.25 to 0.35. The emissivity of magnetron vacuum sputtering "Low-E" coated glass is between 0.08 and 0.15. It is worth noting that a low emissivity directly corresponds to a low "u" value. The closer the emissivity of glass is to zero, the better its thermal insulation performance will be.
The superiority of an "energy-saving daylighting system" must be reflected in the transmission of the highest possible total solar energy while having the lowest "u" value. By considering both the gain of energy and the loss of heat simultaneously, the energy balance equation was established, Ueg=UF-RFg. The daylighting system with the best energy balance characteristics is vacuum magnetron sputtering "Low-E" coated insulating glass. Although single-layer glass has the maximum solar energy transmission, its "u" value and "Ueg" value are the worst. Therefore, the demand for a good energy balance cannot be met.
High solar energy transmission alone cannot be regarded as an energy-saving material if it cannot effectively retain this energy. Low-E" coated insulating glass is a relatively good energy-saving and light-transmitting material. It has a relatively high solar energy transmission and a very Low "u" value. Moreover, due to the effect of the coating, the heat reflected by the "low-E" glass returns to the room, making the temperature near the window glass relatively high. People near the window glass will not feel too uncomfortable. Buildings that apply "Low-E" window glass have relatively higher indoor temperatures. Therefore, they can maintain a relatively high indoor temperature in winter without frost formation, and people indoors will also feel very comfortable. Low-E" glass can block a small amount of ultraviolet transmission and is slightly helpful in preventing the fading of items indoors.
