Manufacturing Technique Of Tempered Glass

May 29, 2025

Leave a message

Before tempering, ordinary flat glass is first cut to the determined shape and size, and then undergoes pre-treatment processes such as glass cutting, edge trimming, drilling and cleaning, and then tempering production is carried out. The production processes of tempered glass include physical tempering and chemical tempering. The process of physical tempering is classified into air tempering, liquid tempering and solid particle tempering according to the different cooling media. Currently, the air tempering process is mainly used in factory production. Chemical tempering is a method that achieves tempering by altering the composition of the glass surface. Commonly used chemical tempering methods include surface dealkalization, coating with glass with a small coefficient of thermal expansion, and alkali metal ion exchange. 

news-767-735

The air tempering method involves uniformly heating ordinary flat glass in a heating furnace to a temperature close to the softening point of the glass. Through its own deformation, the internal stress of the glass is eliminated. Then, the glass is removed from the heating furnace, and high-pressure cold air is blown onto the two large surfaces of the glass with multi-head nozzles, causing it to cool rapidly and evenly to room temperature. Thus, tempered glass can be produced. Because the surface of the glass cools and hardens first when it cools rapidly, but the interior of the glass has not yet completely cooled, the hardened surface layer prevents the volume shrinkage inside the glass. Eventually, the surface layer of the glass is in a compressed state, and a tensile stress layer that is generally balanced with the compressive stress is generated inside it. When the stress balance system between the surface and the interior of the glass is disrupted by the outside, the entire glass will shatter. The strength of tempered glass is mainly related to the magnitude of compressive stress on the glass surface. When physical tempered glass is broken, the cracking first starts from the inside. The crack propagation speed caused by tensile stress is very fast. Meanwhile, the compressive stress on the outer layer of the glass has the effect of keeping the broken inner layer from scattering easily. Therefore, when physical tempered glass breaks, only glass particles without sharp corners are produced. 

news-551-486

The principle of the alkali metal ion exchange method is to immerse ordinary glass in an alkali metal molten salt at a certain temperature (not exceeding the transition temperature of the glass). The alkali metal cations with smaller radii on the glass surface, such as sodium ions (Na), undergo ion exchange with the alkali metal cations with larger radii in the alkali salt, such as lithium ions (Li). The surface of the glass forms a surface layer containing a large volume of alkali metal cations. The volume of the particles in the glass structure is large, and the shrinkage is small when the glass cools to room temperature. However, the volume of the particles in the internal structure of the glass is small, and the contraction is large when the glass cools, thereby generating compressive stress on the surface of the glass. The compressive stress value of the ion exchange method is directly proportional to the number of ions immersed. The greater the number of ion exchanges and the deeper the penetration into the surface layer of the glass, the greater the compressive stress on the surface of the finished glass product and the greater the thickness of the compressive stress layer. The stress distribution generated in the glass by physical tempering and chemical tempering methods is different. The maximum compressive stress on the surface of chemically tempered glass is relatively large, the thickness of the compressive stress layer is relatively small, and the maximum tensile stress value inside is relatively small. Therefore, when glass made by the chemical tempering method breaks, the fragments produced are relatively large and the safety is relatively low. 

The physical tempering method has high production efficiency and low cost, but it is not suitable for thin, small-sized and complex-shaped glass products. The chemical tempering method is the opposite. The thickness of the surface compressive stress layer of glass produced by physical tempering is higher than that of glass produced by chemical tempering. The surface flatness of tempered glass produced by physical tempering is lower than that of glass produced by chemical tempering. The stress layer in glass produced by physical tempering is not prone to stress relaxation, while chemically tempered glass is prone to stress relaxation. 

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!