There is a connection, but it is very minor and can usually be disregarded.
Core principle: Refraction and absorption of light
The light transmittance of laminated glass mainly depends on two factors:
The glass itself: Types of glass (such as clear glass, ultra-white glass), thickness and surface treatment.
Intermediate layer film: The material (such as PVB, SGP, EVA, etc.) and thickness of the film.

The influence of film on light transmittance mainly occurs in the following two ways:
Absorption of light: All materials absorb light to a certain extent. The thicker the film is, the longer the material path the light needs to pass through, and the more light is absorbed. Theoretically, the light transmittance will slightly decrease.
Scattering and refraction of light: If the refractive indices of film and glass are not exactly the same, slight refraction and reflection will occur at the interface between glass, film and glass. The change in film thickness will slightly alter the optical path, but this effect is almost imperceptible on a macroscopic level.
2. Why is the relationship "very small"?
High-quality films have extremely high transparency: The PVB, SGP and other films used in modern laminated glass have excellent optical properties themselves and have an extremely low absorption rate of visible light. Therefore, even if the thickness increases, the additional light absorption it brings is negligible.
The main determining factor is glass: for the standard "glass + film + glass" structure, the vast majority of light directly passes through the two layers of glass. The film is clamped in the middle. As long as its transparency is high enough, its "contribution" or "reduction" to the overall light transmittance will be very limited.

A simple analogy:
Imagine that you are looking through two very clean pieces of glass. Now, drop a drop of water between these two pieces of glass. The thickness of the water (equivalent to film) has increased, but you hardly notice any change in the brightness of what you see. The film of laminated glass is like this drop of water, but it is made of polymer materials with excellent optical properties.
3. Considerations in Practical applications
Although theoretically, film thickness has an impact on light transmittance, in practical engineering and selection, we usually do not consider it as a major variable to deal with the issue of light transmittance. The more important considerations are:
Glass type: This is the most significant factor affecting light transmittance.
Ordinary float glass: It has a light green color by itself and a relatively low light transmittance (about 88%-91%).
Ultra-clear glass: With a low iron content, it is whiter in color and has an extremely high light transmittance (about 91%-94%). The use of ultra-clear glass can significantly enhance the overall light transmittance of laminated glass.
Film type: The basic light transmittance of different types of films varies slightly, but they are all very high.
Transparent PVB: Extremely high light transmittance.
Colored PVB (such as gray, bronze, and milky white) : At this point, the influence of thickness on the shading coefficient and visible light transmittance becomes more obvious. The darker the color and the thicker the film, the better the shading and privacy effects. In this case, the thickness is inversely proportional to the light transmittance.
SGP film: Its transparency is comparable to that of PVB, but it has better strength and structural performance.
The total thickness of laminated glass: An increase in the thickness of the glass itself will significantly reduce the light transmittance. For instance, the light transmittance of 6mm glass is lower than that of 3mm glass.
Conclusion
For transparent and colorless laminated glass (such as when using transparent PVB film), an increase in film thickness will cause an extremely slight decrease in light transmittance. However, this change is usually less than 1% in conventional applications (for example, from 0.38mm standard PVB to 1.52mm), which is almost indistinct to the human eye and can be ignored.
If you are in pursuit of the highest light transmittance, you should give priority to choosing ultra-clear glass with high-transparency film rather than being obsessed with the thickness of the film.
When using colored film, the thickness of the film becomes an important design parameter that affects the light transmittance and shading performance.
