How To Identify Coated Glass?

Jul 01, 2025

Leave a message

There are methods to identify coated glass, such as observing color and luster, touch detection, resistance testing, optical testing, instrument detection, induction detection, empirical observation, and using the method to distinguish the tin surface of glass.

Observe the color and luster

 

Coated glass usually has a special color display. Its coated surface often presents a metallic luster, as bright as a mirror. Ordinary glass surfaces, on the other hand, may have color, but the glossiness is relatively low. In addition, coated glass has adjusted the transmittance of visible light, so the transmission effect of light indoors and outdoors can be observed to assist in judgment. Specifically, the coated surface, due to its high reflectivity, may make the indoor light softer while reducing the direct penetration of outdoor light.

Tactile detection

 

Coated glass also differs from ordinary glass in terms of touch. Generally speaking, the surface without a film is relatively smooth, while the surface with a film may feel slightly rough. By gently touching the glass surface with your hand, you can feel this difference. It should be noted that this method may not be very suitable for high-quality coated glass, as both the film surface and the glass surface of high-quality coated glass can be very smooth.

Resistance test

 

Most coated glasses are conductive, so resistance testing tools such as multimeters can be used to identify them. Touch the positive and negative terminals of the multimeter to the glass surface respectively. If the resistance value shows infinity, it indicates that this surface is an ordinary glass surface. If the resistance value is small, it is a coated surface. This method is simple and straightforward, and has a relatively high accuracy rate.

Optical testing

 

In addition to the above methods, coated glass can also be identified through optical tests. For instance, use a lighter or other light source close to the glass surface to observe the reflection of flames or light. Due to its special coating layer, coated glass may produce different brightness double images or color changes. By observing these changes, it can be determined which side is the coated surface. It should be noted that different types of coated glass may exhibit different optical properties, so specific circumstances need to be analyzed when conducting tests.

Instrument detection

 

Professional film surface detectors can be used, which are convenient, fast and accurate. When the plastic surface comes into contact with the glass, it will not scratch the glass. Its greatest advantage is that even when the film surface of the coated glass is sealed (such as hollow or laminated combinations), it can still determine which piece is the film surface.

Inductive detection

 

Use the induction pen provided by Gravibao Company. Touch the film surface with one hand and hold the induction pen (with your finger touching the electrode of the induction pen) with the tip of the pen. If you see a light on or hear a beeping sound, it can be determined that it is the film surface. This pen is also designed based on the principle that the film layer conducts electricity.

Empirical observation

 

Experienced employees touch the surface of the glass with their hands. The smooth surface is the glass surface and the non-smooth surface is the coated surface. However, for high-quality coated glass, both the coated surface and the glass surface are very smooth, making it difficult to make an accurate judgment. This method is simple and easy to perform, but a slight mistake may damage the membrane surface.

Use the method to identify the glass tin surface

 

The self-made ultraviolet tin surface meter can also measure the film surface, that is, the non-tin surface side is the film surface.

 

In conclusion, the identification of coated glass can be achieved through various methods such as observing color and luster, touch detection, resistance testing, and optical testing. In practical applications, appropriate methods can be selected for identification based on specific circumstances. At the same time, it should be noted that during the identification process, one should operate with caution to avoid causing damage to the glass.

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!