The heat loss of the exterior door and window glass is the main part of the building's energy consumption, accounting for more than 50% of the building's energy consumption. Relevant research data indicate that the heat transfer on the inner surface of glass is mainly by radiation, accounting for 58%. This means that to reduce the loss of heat energy by changing the performance of the glass, the most effective way is to suppress the radiation on its inner surface. The emissivity of ordinary float glass is as high as 0.84. When coated with a layer of low-emissivity film based on silver, its emissivity can be reduced to below 0.15. Therefore, using Low-E glass to manufacture building doors and Windows can significantly reduce the transfer of indoor heat energy to the outside caused by radiation, achieving an ideal energy-saving effect.
Another significant benefit brought about by the reduction of indoor heat loss is environmental protection. In cold seasons, the emission of harmful gases such as CO2 and SO2 caused by building heating is an important source of pollution. If Low-E glass is used, due to the reduction of heat loss, the fuel consumed for heating can be significantly reduced, thereby reducing the emission of harmful gases.
The heat passing through the glass is bidirectional. Heat can be transferred from the interior to the exterior and vice versa, and it occurs simultaneously. It's just a matter of the difference in heat transfer. In winter, the indoor temperature is higher than that outdoors, so insulation is required. In summer, the indoor temperature is lower than that outside. It is required that the glass can insulate heat, that is, to transfer as little heat from outside as possible into the room. Low-E glass can meet the requirements of both winter and summer. It can both keep warm and insulate heat, achieving an environmentally friendly and low-carbon effect.
