Customized Glass Door Patch Fittings Manufacturers Suppliers - Factory Direct Price

Product Overview

Patch Fittings for Frameless Glass Door Systems
Glass door patch fittings are mechanical hardware components used to connect frameless glass door panels to floor pivots, overhead pivots, door-control systems, and adjacent glass panels, depending on the fitting design.

They are commonly specified for commercial entrances, office partitions, retail storefronts, hotels, and other architectural glazing projects.

Key Purchasing Considerations
Glass Compatibility: Confirm glass thickness, construction, gasket requirements, and cutout dimensions for the selected fitting.

Door Load and Dimensions: Match the fitting and associated pivot or floor spring to the specified door leaf weight, width, height, and operating conditions.

Hardware Interface: Verify spindle geometry, pivot positions, and mounting dimensions before ordering.

Material and Finish: Specify the required base material, cover plate material, surface finish, and corrosion-resistance requirements.

Technical Documentation: Confirm the availability of dimensional drawings, installation instructions, material documents, and applicable test reports.

L Shaped Patch Fitting With Stop
The L-Shaped Glass Door Patch Fitting with Stop is a glass door hardware component designed for compatible frameless glass door assemblies. Its L-shaped configuration and integrated stop mechanism...
view more
Transom Glass Door Patch Connector
Used in frameless glass assemblies where a transom panel connects to another glass panel or a compatible hardware component. The exact connection function depends on the selected model and...
view more
Overpanel Patch Fitting With Pivot
An overpanel patch fitting with pivot is a glass door hardware component used in frameless glass door assemblies. Its exact function and connection arrangement depend on the product design, glass...
view more
Bottom Lock Glass Door Patch Fitting
Provides a locking point at the lower edge of a glass door, with operation dependent on the selected bolt mechanism and matching floor receiver.
view more
Top Pivot Glass Door Patch Connector
The Top Pivot Glass Door Patch Connector is a hardware component used to connect a compatible glass door assembly to its upper pivot interface. Its function and mounting arrangement depend on the...
view more
Bottom Offset Glass Door Patch Fitting
The Bottom Offset Glass Door Patch Fitting connects the lower corner of a frameless glass door to a compatible floor spring or bottom pivot assembly. Correct selection depends on the pivot offset,...
view more

Product Range & Technical Specifications

Main Patch Fitting Types

Top Patch Fittings:

Connect the upper part of a glass door leaf to a compatible pivot or door-control assembly.

Bottom Patch Fittings:

Connect the lower part of the door leaf to a compatible floor spring or floor pivot.

Corner and Overpanel Patch Fittings:

Connect glass panels in configurations specified by the project drawings.

Lock Patch Fittings:

Incorporate locking functions for compatible frameless glass door systems.

Related Patch Fittings:

Additional configurations are available depending on the door layout and hardware system.

Technical Specification Reference

Parameter	Options or Information to Confirm
Fitting Type	Top, bottom, corner, overpanel, or lock patch fitting
Glass Thickness	Examples: 8, 10, 12, 15, or 19 mm; confirm availability by model
Glass Construction	Monolithic toughened glass or compatible laminated glass, subject to model approval
Fitting Body Material	Aluminum alloy, brass, or other model-specific materials
Cover Plate Material	Stainless steel, aluminum, or brass, depending on the product
Surface Finish	Satin, polished, matte black, gold-tone, or other available finishes
Door Leaf Weight	Confirm the rated maximum for the selected fitting and compatible door-control system
Door Leaf Width and Height	Confirm model-specific limits and project requirements
Pivot Interface	Spindle profile, dimensions, center offsets, and compatible hardware model
Accessories	Gaskets, clamping hardware, cover plates, and installation tools, as specified per model
Drawings and Documents	Confirm available CAD drawings, installation instructions, and material documentation

Application Fit & Pre-Order Checklist

Match the Hardware to the Project

Commercial Entrances:

Check door dimensions, opening frequency, floor spring compatibility, and the rated capacity of the complete hardware arrangement.

Replacement Projects:

Compare existing cutouts, spindle dimensions, fixing positions, and fitting geometry. Similar external dimensions do not necessarily indicate interchangeability.

Office and Retail Partitions:

Coordinate fitting dimensions, glass clearances, finish consistency, and the overall door layout.

Glass Doors with Overpanels:

Verify panel connections, mounting positions, and clearances against approved project drawings.

Information Required Before Production

Item	Details to Provide
Product Configuration	Top, bottom, corner, overpanel, or lock fitting
Glass Specifications	Thickness, construction, and cutout drawing
Door Leaf Dimensions	Width, height, and total weight per leaf
Hardware Compatibility	Floor spring, pivot, or closer model and interface dimensions
Material and Finish	Required material grade and finish reference
Order Requirements	Quantity, packaging, branding, and labeling
Project Documents	Door schedule, technical drawings, and applicable specifications

Manufacturing, Quality Control & OEM

Product Quality Checks

Inspection procedures should be defined according to the product specification and purchase agreement.

Material Verification: Check material identification and review available supplier certificates or test documents where applicable.

Dimensional Inspection: Verify critical dimensions, mounting positions, spindle interfaces, and thread specifications against approved drawings.

Assembly Inspection: Check component fit, gasket placement, clamping hardware, and locking mechanism operation where applicable.

Surface Finish Inspection: Inspect visible surfaces for scratches, pitting, coating defects, and unacceptable color variation.

Inspection criteria, sampling plans, tolerances, and reporting requirements should be agreed before bulk production.

OEM and Private-Label Options

Product Customization: Confirm available options for fitting dimensions, component materials, and hardware interfaces.

Branding and Packaging: Custom logos, product labels, barcodes, and retail packaging can be discussed according to order requirements.

Surface Finish: Specify the finish reference, color sample, or approved sample for batch consistency.

Documentation: Confirm the availability of dimensional inspection records, material documents, and other project-specific records before ordering.

Custom options, minimum order quantities, samples, and production lead times depend on the selected model and order specifications.

Bulk Orders & Project Supply

Procurement and Delivery Coordination

Distributor Orders:

Define product codes, model variations, packaging quantities, and labeling requirements for stock management.

Project-Based Orders:

Organize products by door number, floor, zone, or installation sequence when supported by the agreed packing plan.

Export Packaging:

Confirm protective packaging, carton specifications, pallet requirements, and shipping marks according to the order and transport conditions.

Production Planning:

Agree on approved samples, drawings, quantities, inspection requirements, and delivery schedules before order confirmation.

Frequently Asked Questions

Q: Which glass thicknesses are compatible with patch fittings?

A: Compatibility depends on the specific fitting, gasket configuration, and glass construction. Provide the glass thickness and type so the appropriate model and clamping arrangement can be confirmed.

Q: How do I check compatibility with an existing floor spring?

A: Provide the floor spring model, spindle profile, dimensions, and relevant installation drawings. Confirm the interface and rated capacity before selecting the bottom patch fitting.

Q: Which materials and finishes are available?

A: Options depend on the selected model. Specify the required fitting body material, cover plate material, stainless steel grade where applicable, and finish reference. Confirm the exact combination before ordering.

Q: Can I obtain CAD drawings before glass fabrication?

A: Request the dimensional drawing and glass cutout template for the selected model. Verify all hole positions, notches, clearances, and pivot offsets before cutting or tempering the glass.

Q: Can patch fittings be supplied with private labeling?

A: OEM options may include logos, product labels, barcodes, and customized packaging. Confirm the available options, minimum order quantity, artwork requirements, and lead time for your order.

Q: What information is required for a bulk quotation?

A: Provide the fitting type, glass specifications, door dimensions and weight, compatible floor spring or pivot model, material and finish, order quantity, destination, and target delivery date.

Request a Bulk Quotation

Send your product schedule or project drawings for a specification review and quotation.
To help us assess your requirements, please provide:
Required Fitting Types and Quantities: Specify the fitting models and quantities needed.
Glass Specifications: Provide the glass thickness, construction, and cutout drawings.
Door Leaf Dimensions: Include the width, height, and weight of each door leaf.
Hardware Compatibility: Specify the floor spring, pivot, or closer model.
Materials and Finishes: Identify the required materials and surface finish references.
OEM Branding and Packaging: Describe any logo, labeling, or packaging requirements.
Delivery Details: Provide the destination and target delivery date.
Model compatibility, technical specifications, documentation, pricing, and lead times will be confirmed against the final order requirements.

As one of the most professional glass door patch fittings manufacturers and suppliers, we're featured by quality products and good price. Please rest assured to buy customized glass door patch fittings from our factory.