In simple terms, the core reason is: to eliminate the micro-cracks and edge defects generated during glass cutting, and prevent these defects from becoming stress concentration points during tempering, which could lead to self-explosion of the glass during processing or use.
Core principle: Stress concentration
The brittleness of glass: Glass is a brittle material and is highly sensitive to surface scratches, notches and cracks. When these defects are subjected to external forces or internal stress, the tips will generate huge stress concentration, just like making a small cut when tearing fabric. Cracks can easily start to expand from here.
The inevitability of the cutting process: After the glass is cut, extremely tiny cracks, chipped edges and notches will be left on the edges (although they may not be visible to the naked eye). These are the inevitable damages caused by cutting tools.
The huge stress in the tempering process: Tempered glass is made by heating ordinary glass to a temperature close to its softening point and then rapidly and uniformly cooling it. During the cooling process, the surface of the glass cools and solidifies rapidly, while the interior cools more slowly. This leads to the formation of a strong compressive stress layer on the surface, while a tensile stress layer is formed inside to balance it. This stress structure makes tempered glass 3 to 5 times stronger than ordinary glass.
What would happen if the edges were not ground?
If tempering is carried out with untreated edges that have microcracks, the following dangerous situations will occur:
Self-explosion during processing: During the heating or cooling stage of the tempering furnace, the huge thermal stress and structural stress inside the glass will directly act on the microcracks at the edges. The tips of these cracks cannot withstand such high stress and will cause the entire piece of glass to break automatically in the tempering furnace in an instant, resulting in production failure and waste of resources.
Self-explosion during use: Even if it luckily passes the tempering process, this piece of glass is still a "time bomb". During transportation, installation or daily use, even minor bumps, temperature changes or even just the natural release of stress can trigger a rupture starting from the fragile edge, leading to an unexpected self-explosion and posing a safety hazard.

The benefits brought by edge grinding
The edge grinding process (including rough grinding, fine grinding, polishing, etc.) mechanically removes the fragile edge layer, achieving the following goals:
Eliminate microcracks: Thoroughly grind off all surface defects and crack layers generated during cutting to form a smooth, uniform and complete edge.

Create a uniform stress distribution: Smooth edges ensure that the compressive stress generated during the tempering process can be evenly distributed across the entire surface and edges of the glass, without suddenly concentrating at a certain point.
Enhance mechanical strength: A complete and intact edge itself can withstand greater external force impacts without easily chipping or cracking.
Aesthetics and safety: The edges of the glass after grinding are smooth and do not cut hands, presenting a more refined appearance. It is also convenient for later installation and operation, preventing people from being scratched.
