The light transmittance of coated glass depends on multiple factors and can be summarized into two major aspects: the characteristics of the glass substrate itself and the coating layer.
I. Factors of Glass Substrate (Foundation)
Before coating, the glass itself is the basis for transmitting light.
The material and purity of glass: The light transmittance of the most common float glass itself is between 88% and 91% (for 6mm standard white glass). If ultra-clear glass (low-iron glass) is used, the light transmittance of its substrate can be as high as over 91%, as it significantly reduces the absorption of visible light by iron impurities, providing a higher starting point for subsequent coating.
The thickness of the glass: The thicker the glass, the more it absorbs and reflects light, and thus the light transmittance will slightly decrease. For instance, for the same coating process, the light transmittance of 6mm glass is higher than that of 12mm glass.
Ii. Factors of the Coating Layer (Core Key)
The coating layer is the core that determines the final optical performance of coated glass (such as light transmittance, reflectance, shading coefficient, etc.).
Material composition of the film layer:
This is the most fundamental factor. Different metals or metal compounds have completely different effects on light.
Single-silver, double-silver, and triple-silver Low-E films: Different performances are achieved by embedding different amounts of silver (Ag) layers. The silver layer is an excellent reflector of infrared rays, but it has a high transmittance for visible light. Generally, the more silver layers there are, the better the heat insulation and heat preservation performance (low emissivity), but engineers can strike a balance between the best heat insulation and the highest light transmittance by adjusting other film layers.
Oxide film layers: such as titanium dioxide (TiO₂), silicon dioxide (SiO₂), zinc oxide (ZnO), etc. These dielectric films mainly serve regulatory purposes, such as protecting functional layers, altering optical properties, and enhancing color, etc. Their types, thicknesses and sequences directly affect the final color and light transmittance.
Nitride film layers: such as silicon nitride (Si₃N₄), are commonly used as protective layers and are also very hard and wear-resistant.
The structure and thickness of the film layer:
The film system of coated glass is a complex nanoscale multilayer structure. The thickness of each layer has been precisely calculated, and the expected effect is achieved by taking advantage of the interference of light.
By precisely controlling the thickness of each layer, enhanced transmission or reflection of light of specific wavelengths can be achieved. For instance, the design of Low-E glass aims to maximize the transmission of visible light (380-780nm) while maximizing the reflection of mid - and far-infrared rays (thermal radiation). Even the slightest change in film thickness can significantly alter the light transmittance and reflectance.
Types and functions of film layers:
Solar Control Coating: Its main purpose is to reflect solar radiation energy and reduce the shading coefficient. The light transmittance of this type of film layer is usually low (for example, 20%-50%), and it comes in a variety of colors (such as bronze, gold, blue, etc.). It is often used in curtain walls to reduce the entry of indoor heat.

Low-E Coating: Its main purpose is to reflect indoor heat radiation, providing insulation and energy conservation. Modern Low-E films (especially double-silver and triple-silver ones) can achieve high light transmittance (such as 60%-80%) while having excellent heat insulation performance, making them highly suitable for residential and commercial buildings that pursue natural lighting.

Anti-reflective Coating (AR Coating) : Specifically designed to maximize light transmittance (up to over 99%), it offsets the reflected light from the glass surface by coating multiple layers of dielectric films of specific thicknesses on both sides of the glass. It is commonly used in museum display cabinets, display screens, solar photovoltaic glass, etc.
Production process
Offline coating (magnetron sputtering) : The process is flexible and can produce complex film systems of various colors and functions (such as double silver, triple silver Low-E), with superior performance. However, the film layer is relatively soft (usually needs to be made into insulating glass for use).
Online coating (Chemical vapor Deposition CVD) : The film layer is hard and durable, and can be used as a single piece, but its function is relatively single. Usually, the light transmittance is High and cannot be adjusted (for example, the well-known domestic "online High-Low-E" glass has a light transmittance of over 80%).
Summary
In simple terms, the light transmittance of coated glass is the result of the combined effect of the "light transmittance of the base glass" and the "interference, absorption and reflection effects of the coating layer on light".
If you want to achieve high light transmittance, you would choose ultra-clear glass as the base material and coat it with a high-transparency Low-E film or anti-reflection film.
If you want to achieve low light transmittance (i.e., shading effect), you would choose to coat it with a sunlight control film, which deliberately increases the reflection and absorption of visible light.
Therefore, when choosing coated glass, it is essential to clearly define your core needs: whether you are pursuing high transparency for lighting and heat preservation (high transparency Low-E), or whether you are pursuing shading and appearance effects (sunlight control film). Manufacturers can precisely "customize" products with different light transmittance by adjusting the material, structure and thickness of the film layer.
