The Differences Between High-transparency Lowe Glass And Ordinary Lowe Glass ?

Jun 25, 2025

Leave a message

1. The metals to be plated are different.  All are produced by vacuum magnetron sputtering processing technology, and all are coated with films composed of metals or other compounds on the glass surface.  Under normal circumstances, ordinary lowe glass mainly contains metal oxides, nitrides, etc., while high-transparency lowe glass, in addition to these, is also coated with a layer of metallic silver.  High-transparency lowe glass can not only transmit visible light highly but also reflect mid - and far-infrared rays highly. This also leads to a better reflection effect of high-transparency lowe glass on solar radiation than that of ordinary lowe glass.  

 

2. The energy-saving effects are different.  The energy-saving effect of high-transparency lowe glass is very good.  Ordinary lowe glass is relatively insufficient. This is because ordinary lowe glass can only demonstrate good energy-saving effects when the solar radiation is strong, that is, the best time during the day in summer. However, in winter when the solar radiation is not so strong or at night when there is no solar radiation, the function of ordinary lowe glass is almost the same as that of ordinary glass.  

 

I. What is lowe glass?  

 

Low-E glass, also known as low-emissivity glass, is a product with a film system composed of multiple layers of metals or other compounds coated on the surface of the glass.  Its coating layer has the characteristics of high transmittance of visible light and high reflection of mid - and far-infrared rays, making it have excellent heat insulation effect and good light transmittance compared with ordinary glass and traditional coated glass for buildings.  

 

Ii. Advantages of Low-E Glass  

 

Low-E glass has a high infrared reflection and is capable of directly emitting far-infrared thermal radiation.  Moreover, the surface emissivity E is low, and it will not absorb too much external energy, so the amount of heat energy radiated out is small.  The shading coefficient Sc range of Low-E glass is wide, and the amount of solar energy transmitted can be controlled and adjusted according to the conditions of different regions.  Furthermore, the Low-E film is coated with a silver layer, which can reflect 98% of the far-infrared radiation.  

 

Iii. What are the functions of Low-E glass in summer and winter?  

 

In winter, the indoor temperature is higher than that inside. The far-infrared thermal radiation mainly comes from inside. Low-E glass can reflect it back into the room, thus keeping the heat inside from escaping.  For some solar radiation from the outside, it can still pass through the Low-E glass and enter the room. This part of the energy is absorbed by the objects in the room and then converted into far-infrared thermal radiation and remains in the room.  

 

In summer, the outdoor temperature is higher than the indoor temperature. The far-infrared thermal radiation mainly comes from the outside. The Low-E glass can reflect it out, thereby preventing the heat from entering the room.  For solar radiation from the outside, low-E glass with a Low shading coefficient can be selected to restrict its entry into the room, so that the room will not be too hot and stuffy


Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!