Laminated Glass Material Technology

Feb 13, 2025

Leave a message

1. Cutting glass

Firstly, cut the glass according to the required size. Usually, the glass used has two or more layers.

2. Cleaning treatment

The cut glass needs to be cleaned to ensure a clean surface without leaving dust or dirt.

3. Preparation of interlayer

Prepare polyethylene (PVB) film or other suitable plastic interlayer materials. This layer of film is usually transparent or colored, and different colors can be chosen as needed.

4. Stacking

Place the prepared interlayer between two pieces of glass to form a laminated glass structure. The number of layers of laminated glass can be determined as needed, usually two or more layers.

5. Heating and pressure treatment

Place laminated glass into specialized heating and pressure equipment. Under the action of high temperature and pressure, the interlayer material becomes viscous and tightly adheres to the glass surface.

6. Cooling

After heat treatment, laminated glass needs to be cooled to ensure that the laminated material is completely cured and forms a sturdy structure.

7. Cutting and shaping

The cooled laminated glass can be cut and shaped as needed to meet specific design and installation requirements.

8. Inspection

Conduct quality inspection on laminated glass to ensure compliance with relevant safety and quality standards.

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!