Tempered glass is actually a kind of prestressed glass. Usually, chemical or physical methods are used to create compressive stress on the surface of the glass. When the glass is subjected to external force, the surface stress is first offset, thereby enhancing the load-bearing capacity and improving the tensile strength of the glass. The main advantages of tempered glass are two: Firstly, its strength is several times higher than that of ordinary glass. Its flexural strength is 3 to 5 times that of ordinary glass, and its impact strength is 5 to 10 times that of ordinary glass. While increasing the strength, it also enhances safety. The second advantage is that its load-bearing capacity has been enhanced, improving its fragile nature. Even if tempered glass breaks, it shatters into small, non-sharp fragments, significantly reducing the risk of harm to the human body. The resistance to sudden temperature changes of tempered glass is 2 to 3 times higher than that of ordinary glass. The surface compressive strength is increased to 69Mpa, and it can generally withstand temperature changes above 150 degrees Celsius, which has a significant effect on preventing thermal cracking. However, due to the special technical processes adopted during the tempering process of the glass, the surface flatness is slightly worse than that of flat and tempered glass.

1. Polarizing lens identification
When wearing polarized sunglasses to look at the glass, the surface of tempered glass should show colorful striped patterns, while ordinary glass does not. When looking at the glass from the side with the naked eye under the light, there will be bluish spots on the tempered glass.
2. Check the certificate by looking at the logo
Since the safety glass product certification was launched in 2003, most of the building tempered/laminated glass manufacturing enterprises across the country have passed the product certification. Enterprises must screen or affix the CCC mark on the products they sell, or add the CCC mark on their outer packaging and accompanying documents.
When choosing products, first check if there is a CCC mark. Then, based on the enterprise information, factory number or product certification certificate number, etc., check through the Internet whether the manufacturing enterprise of the product has passed the compulsory product certification, whether the model and specification of the product are within the capacity range of the enterprise that has passed the compulsory certification, and whether the status of the certification certificate is within the validity period.
3. Feel the surface to find the curvature
The flatness of tempered glass is worse than that of ordinary glass. If you touch the surface of tempered glass hard with your hand, there will be a feeling of unevenness. When observing the longer edge of tempered glass, there will be a certain degree of curvature. According to the GB15763.2-2005 standard, the bow-shaped curvature of flat tempered glass products should not exceed 0.3%, and the wavy curvature should not exceed 0.2%. When two very large pieces of tempered glass are placed together, the curvature will be more obvious.

Usually, the trademarks on glass are printed with high-temperature ink, so it can basically be determined that it is tempered. Unless the trademark can be scratched off, it may not be tempered.
There is a simple way to determine tempering. Stand it up and observe the reflected objects on the glass. When viewed from different angles, if the objects show regular wavy deformations, it can be determined that it has been tempered. These are the glass ribs produced after tempering.
If there is extra glass, just blast one piece. The fragments should be small particles without large sharp pieces, which is tempered glass.
