The structure of a glass greenhouse mainly includes the greenhouse foundation, greenhouse steel structure and aluminum alloy structure, etc.
Foundation
1. Basic classification: The foundations of glass greenhouses are divided into two types: independent column foundations and strip foundations. Independent foundations can be used for inner columns or side columns, while strip foundations are mainly used for side walls and interior partition walls.

2. Design Requirements: Before the design, a thorough analysis of the geological data of the construction site should be conducted. The first is the geological investigation report of the site (for important large-scale greenhouse projects); The second is on-site construction testing (for general projects); The third is based on experience and reference geological data from nearby projects (for small-scale projects). When designing the foundation, in addition to meeting the strength requirements, it should also have sufficient stability and the ability to resist uneven settlement. The foundation connected to the column supports should also have sufficient capacity to transmit horizontal forces and spatial stability. The bottom of the greenhouse should be located below the frozen soil layer. For heating greenhouses, the impact of heating on the freezing depth of the foundation can be considered based on the climate and soil conditions. Generally, the bottom of the foundation should be more than 0.5 meters lower than the outdoor ground, and the distance between the top surface of the foundation and the outdoor ground should be greater than 0.1 meters to prevent the foundation from being exposed and having adverse effects on cultivation. Except for special requirements, the distance between the top surface of the greenhouse foundation and the indoor ground should be greater than 0.4 meters. The embedded parts connected to the greenhouse steel structure are all set on the top of the foundation, and the design of the embedded parts is also an important component of the foundation design. The connection methods between embedded parts and the superstructure mainly include hinge, consolidation and elastic connection, etc. Depending on the different connection methods, the design and construction methods also vary. However, all embedded parts must ensure a good connection with the foundation and ensure that the forces transmitted from the superstructure are correctly transferred to the foundation.
3. Basic materials and construction characteristics
(1) Independent foundation Reinforced concrete is usually utilized. In terms of construction methods, independent foundations can be divided into two types: fully cast-in-place and partially cast-in-place. The full cast-in-place pouring is carried out by setting up formwork on the construction site and pouring as a whole. Some cast-in-place methods adopt the prefabrication of foundation short columns and on-site pouring of foundation bedding. Two methods can be chosen and adopted according to specific circumstances. The cast-in-place method has the characteristics of good integrity and relatively low cost. Some cast-in-place methods have a relatively high cost but a fast construction speed and the construction quality is relatively easy to guarantee.
(2) Strip foundation. Masonry structures (brick, stone) are usually adopted, and the construction is also carried out by on-site masonry. A reinforced concrete ring beam is often set at the top of the foundation to install embedded parts and increase the rigidity of the foundation. In addition, the side wall foundation can also adopt a mixed use method of independent foundation and strip foundation. The bottom surfaces of the two types of foundations can be at the same elevation, or they can be set at different elevations according to the load-bearing conditions and functions. The independent foundation bears the force transmitted from the bottom of the greenhouse column, while the strip foundation is only used as part of the partition component. (3) Precautions for foundation construction. During the foundation construction, it is necessary to ensure the correctness of the column height and the axis position. The openings and installations of equipment and pipelines should be buried in a timely manner. It is strictly prohibited to chisel after construction and damage the foundation.

Steel structure
The main components of the steel structure include the load-bearing structure of the greenhouse and the supports, connecting parts, and fasteners set up to ensure the stability of the structure. 2. Materials and Construction Precautions: The main materials used for steel structures are cold-formed thin-walled steel sections and hot-rolled steel sections. Except for a few components that use high-strength steel, the rest of the steel is A3F. The steel frame of glass greenhouses is generally produced by professional chemical plants. As the greenhouse components are constantly exposed to a high-humidity indoor environment, all structural components should undergo anti-corrosion treatment. It is usually treated by hot-dip galvanizing. To ensure the effect of anti-corrosion treatment, all components should undergo anti-corrosion operations after processing. Cutting, sawing, welding and other operations on greenhouse components are not allowed on site. If there are a few on-site operations, anti-corrosion reinforcement treatment should also be carried out, such as spraying anti-corrosion paint at the processing or wound sites. When installing the framework, it should be carried out strictly in accordance with the drawings and relevant standards, norms and regulations. The industry standard for the main structure of double-slope glass greenhouses has been completed in China. After its official promulgation, it can be used as one of the bases for the construction of steel structures in glass greenhouses. At present, the construction mainly takes "GB 50017-2003 Code for Design of Steel Structures" and "GB 50018-2002 Technical Code for Cold-formed Thin-walled Steel Structures" as the main reference basis for construction.
3. Design Considerations: There are no specific greenhouse design standards in China yet. The design of steel structures for glass greenhouses mainly refers to the greenhouse design standards of countries such as the Netherlands (NEN3859, NEN3860), Japan (Horticultural Facility Structural Safety Standards), and the United States (NGMA). However, in the design, issues such as structural strength, structural stiffness, structural integrity and structural durability must be taken into consideration.
Aluminum alloy
Functional aluminum alloy, as the main inlay and covering support components of glass greenhouses, has the following main functions :(1) It works in conjunction with rubber sealing parts to serve as part of the sealing system for the covering of glass greenhouses; (2) It can be used alone as a supporting and sealing component for the greenhouse roof. (3) Used as a gutter.
2. The design requirements stipulate that the main body should mainly meet the requirements in terms of strength and rigidity. The support part serves as the support for the glass, mainly reserving some full-length support grooves or inlaid grooves. The part of the inlaid section located on the outside of the glass needs to be provided with a special groove for installing rubber seals, which can be used to fix rubber seals or be used in conjunction with small aluminum alloy or stainless steel parts to fix the glass.
