What is opaque white pvb laminated glass?
Opaque White PVB Laminated Glass is an architectural glass product made by using a white PVB (polyvinyl acetal) interlayer film and combining two or more pieces of glass through a special interlayer process. Its main feature is to use an opaque white film layer to form a strong visual masking effect, making the glass surface present a simple and tidy white appearance, while retaining the characteristics of glass materials such as easy cleaning, smooth surface and suitability for fine processing.
Main features of opaque white pvb laminated glass
Higher-level security protection
Excellent privacy protection performance
Excellent decorative effect
Good sound insulation effect
Excellent UV resistance
Technical parameters need be confirmed
The application location and architectural uses of glass;
Glass width, height and purchase quantity;
Single-pane glass thickness or expected sandwich structure;
Requirements for whiteness, color uniformity and masking effect;
Whether specific light transmittance or light-blocking performance is required;
Edge processing, drilling and fixing methods;
Whether it involves load-bearing, safety glass or other regulatory requirements;
Are there any specified samples, drawings or technical standards?
Procurement and quality confirmation suggestions
Visual requirements: Clearly define the required white effect, the degree of occlusion, and the acceptable light transmission performance.
Structural requirements: Provide the size of the glass, installation position, support method and expected load.
Processing requirements: Mark the hole positions, notches, edge grinding methods, exposed edges and hardware connection requirements.
Quality acceptance: Agreed dimensional deviations, visual inspection methods, edge quality and applicable product standards.
Sample confirmation: When there are requirements for color, occlusion effect and edge appearance, the physical sample should be confirmed first, and then mass production can be arranged.
Production process and quality control
Step 1: Confirmation of the original piece and structure.
Step 2: Glass processing and cleaning.
Step 3: Film laying and pre-pressing.
Step 4: High-temperature and high-pressure compounding.
Step 5: Finished product inspection.
Common inspection priorities
Whether there are obvious scratches, contamination or processing defects on the glass surface;
Whether the white effect meets the requirements of the confirmed sample or the agreed agreement;
Whether there are bubbles, impurities or other defects inside the interlayer that exceed the acceptance standards;
Whether there are chipped edges, cracks or processing marks that do not meet the requirements at the edge of the glass;
Whether the finished product dimensions and processing positions are consistent with the order drawings;
Whether the interlayer bonding state meets the requirements of the corresponding product.



FAQ
Hot Tags: opaque white pvb laminated glass, opaque white pvb laminated glass manufacturers, suppliers, factory, tempered glass for variable pressure units, tempered glass for insulated glass units, tempered glass for greenhouses, tempered glass for double glazed units, ultra-clear tempered glass, tempered glass for medical devices
