Floor Laminated Glass

Floor Laminated Glass

Details
Normal size of floor laminated glass: 300*300mm-2440*3660mm
Raw material:good quality raw glass
Quality control:final Inspection before shipment
Delivery:normally 15 days after we received deposit
Technical support:online-technology support
Capacity:strong supply capacity
After sale:7x24-hours service
Category
Laminated Glass
 
Send Inquiry
Description
Technical Parameters

What is Floor Laminated Glass?

 

Floor Laminated Glass is a composite glass product specifically designed for glass floors, glass walkways, viewing platforms and other horizontal load-bearing positions. It is usually composed of two or more pieces of glass combined with intermediate films such as PVB and SGP. Some projects may adopt a multi-layer glass structure, and the thickness of the glass, the number of layers and the type of intermediate film are determined according to the actual usage conditions.

product-562-373

Support system matching

Roof laminated glass is not an independent working component. Its actual performance is closely related to the supporting structure and connection method. Even if the same glass combination is used, if it is installed in different frame systems, the force state may also be different.

Common roof glass systems include aluminum alloy frame supports, steel structure supports, and some glass systems that use point connections. Different structures have different requirements for the edges, holes, supporting positions and fixing methods of glass.

For frame-supported roofs, it is necessary to confirm the contact position between the glass and the frame, the supporting width and the installation gap to avoid the edges of the glass being subjected to unreasonable concentration. For point-type connection systems, it is necessary to focus on verifying the position of the connection holes, the edge spacing of the holes, the form of the connecting parts, and the local stress conditions.

Appropriate spacers, isolation materials or matching connecting parts are usually required between glass and metal components to avoid hard contact. The specific nodes should be determined based on the system design. The reliability of the entire roof structure cannot be judged merely by the strength of the glass itself.

Design and procurement coordination

Roof glass engineering typically involves architectural design units, curtain wall consultants, structural engineers, glass suppliers and on-site installation units. The work contents undertaken by different participants are not the same. Clarifying technical responsibilities in the early stage can help reduce communication problems in the subsequent stage.

When inquiring about prices, the purchaser is advised to provide the final glass grid diagram, product structure requirements, support node data and applicable project standards. If the glass supplier is only responsible for product production, it should also be clearly defined which party is responsible for structural calculation, system design and on-site installation.

For customized glass, the confirmation of drawings is particularly important. The glass number, installation direction, hole position, edge processing and plate size should be consistent to avoid production errors caused by different versions of the drawings.

If the project involves multiple batches of delivery, it is recommended to manage orders using a unified glass number and product list to ensure that production documents, packaging labels and on-site installation locations correspond.

Engineering performance verification

For engineering Roof Laminated Glass orders, the product name and glass size alone are usually not sufficient to determine the final specification. The purchaser should clearly define the performance items that need to be verified based on the project's purpose and confirm them with the supplier before production.

Technical documents may include glass structure descriptions, material specifications, processing drawings, dimensional tolerances, appearance requirements, applicable product standards and necessary testing data.

If the project has requirements for impact resistance, structural load-bearing capacity, post-damage state or other special performance, the corresponding test methods and acceptance basis should be confirmed in advance. The performance verified by different testing items is not the same, and the result of a single test cannot replace all the engineering performance requirements.

For large-scale projects, sample confirmation or technical review can also be conducted before formal mass production to verify whether the product structure is consistent with the design documents. This enables the same set of technical requirements to be used in all links including procurement, design, processing and installation.

Roof slope and glass drainage

The usage environment of roof glass and ordinary facade glass is different. After the glass is installed, it usually forms a certain slope, and rainwater will flow down the surface of the glass to the lower part. Therefore, the size of the glass panels, their splicing positions, supporting structures and sealing nodes all need to be coordinated with the roof drainage system.

In engineering design, attention should be paid to whether the glass joints will form water accumulation positions, whether the drainage channels of the frame are continuous, and whether the sealing materials are suitable for long-term outdoor environments. For complex curved surfaces or multi-angle roofs, it is also necessary to confirm the installation direction and interface relationship of each piece of glass in combination with the actual geometric shape.

It should be made clear that Roof Laminated Glass itself does not have full roof waterproofing function. The joints between the glass panels, the pressure plates, the sealant, the drainage channels and the surrounding connection nodes jointly determine the waterproof performance of the roof system.

If the glass surface is treated with special coating or other functional treatments, it is also necessary to confirm its compatibility with the cleaning method, sealing materials and construction process to avoid surface damage caused by improper construction contact.

Applications

Characteristic residential space

Commercial display area

Hotel and reception space

Exhibitions and theme buildings

Viewing and architectural feature area

product-408-368

Package

1. Glass packed in seaworthy wooden crates or plywood cases.
2. Paper interlayer between every two pieces of glass or powder sprayed onto its surface to ensure safety.
3. Iron/Plastic belt for consolidation.

product-449-339

FAQ

 

Q1: What is Floor Laminated Glass?

Floor Laminated Glass is a Laminated Glass product used for glass floors, walkways, viewing platforms and some stair treads. Its structure needs to be determined based on the load-bearing requirements, support span and project specifications.

Q2: What thickness is generally used for floor laminated glass?

There is no fixed thickness applicable to all projects. The thickness and number of layers of glass depend on the size, span, support method, design load and local building code, and need to be determined through engineering design.

Q3: Does tempered laminated glass need to be used for glass flooring?

Some projects will adopt tempered sandwich structures, but whether they are applicable should be determined by engineering design. Tempering treatment itself cannot replace the verification of overall load-bearing capacity and safety after fracture.

CTA

Looking for cladding interlayer glass suitable for modern building curtain wall systems?

Welcome to contact us for product sample books, technical parameters, glass configuration suggestions and project quotations. Our professional team will provide you with a more suitable glass solution based on your architectural design, usage environment and performance requirements, helping your project achieve the unity of safety, aesthetics and durability.

 

Hot Tags: floor laminated glass, floor laminated glass manufacturers, suppliers, factory, impact resistant laminated glass, factory glass for construction, laminated glass brand, laminated glass technology, bulletproof film for construction glass, construction site glass

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!